Main shaft bearing for wind turbine
zys
Home    >     Bearings    >     Wind turbine bearings

Main shaft bearing for wind turbine

The main shaft bearings are generally spherical roller bearings, and there are also double-row tapered roller bearings with large taper angles. Most impeller main shafts are supported by two spherical roller bearings. Because the load on the main shaft of the impeller is very large, and the shaft is very long and easily deformed, the main shaft bearing must have good self-aligning performance, high impact resistance and wear resistance.

Working conditions of main shaft bearing: low speed (<25rpm), wide temperature range, heavy load, vibration, high humidity.

Grease requirements of main shaft bearing: excellent wear resistance, good oxidation stability, excellent low temperature bearing start-up performance, good water resistance and so on.

  • RELATED INDUSTRIES

Low friction torque wind generator main bearing

Product Feature of main bearing: Light weight, small guiding clearance, low friction force.

Product introduction of  wind generator main bearing: The test results show that the starting friction torque can be reduced by 40% and the power generation efficiency can be effectively improved. The rolling element and the cage are in the state of sliding friction, which transforms part of the sliding friction into rolling friction and plays the role of reducing the friction torque of the bearing.

No.

Bearing model

Dimension d*D*B

Structure

WTG model

1

ZYS-SP001

Φ1315*1725*262

Three row cylindrical roller slewing bearing without gear

750KW

2

240/800CAP6/W33

Φ800*1150*345

Spherical roller bearing

1.5MW

3

240/630CA/W33

Φ630*920*290

Spherical roller bearing

1.25MW

4

3519/800X2

Φ800*1060*285

Double row tapered roller bearing

1.5MW

5

3519/710X2

Φ710*950*248

Double row tapered roller bearing

1.5MW

6

230/800/W26

Φ800*1150*258

Spherical roller bearing

1.5MW

7

240/630CA/W33

Φ630*920*290

Spherical roller bearing

1.5MW

8

239/670CA/W33

Φ670*900*170

Spherical roller bearing

1.5MW

9

240/530CA/W33

Φ530*780*250

Spherical roller bearing

1.5MW

10

240/600CA/W33S0

Φ600*870*272

Spherical roller bearing

1.5MW

11

NU19/1250

Φ1250*1630*170

Single row cylindrical roller bearing

1.5MW

12

3519/950

Φ950*1250*300

Double row tapered roller bearing

1.5MW

13

230/710CA/W33

Φ710*1030*236

Spherical roller bearing

2MW

14

241/600CA/W33

Φ600*980*375

Spherical roller bearing

2MW

15

N6/1200/W26

Φ1200*1520*185

Single row cylindrical roller bearing

1.5MW

16

ZYS-3010

Φ1370*1780*276

Double row tapered roller bearing

1.5MW

WIND ENERGY

As a renewable and clean energy source, wind power is rapidly developing all over the world. Large wind turbines are giant machinery. Nowadays, many 2MW wind power plants under construction have wind turbine blades with a length of about 40 meters, a rotating shaft with a height of 60 to 100 meters and total weight of more than 200 tons. Therefore, the bearings used in wind power must also be large, with an inner diameter ranging from 100 mm to 700 mm. Some models require bearings with an inner diameter of nearly 2 meters. Bearings for wind turbines require high reliability, because the bearings are designed to keep the windmill running for 20 years; and when the fault occurs, the parts are not easy to replace (the bearing is used at a long distance from the ground). Bearing manufacturers need to have a high degree of computer analysis technology and exquisite skills in materials and heat treatment, and need to master the test evaluation technology for large bearing.

LEARN MORE >